Mining Ore Crushing Equipment Expert

Henan Province, China

Zhengzhou West Industrial Zone,451200

+86 1830843555

Mon - Fri: 9:00 - 17:30

Online store always open

Wet energy saving lattice ball mill

MoleDive One-Stop Overflow ball millSolution - Production Capacity Ranging from 5 to 500 Tons Per Hour

The main component of the wet ball mill is a cylinder with a small diameter and a large length, which rotates slowly through the transmission device, and the material is fed from the cylinder to the feeding end. The material is crushed in the cylinder due to the throwing impact and self-grinding of the steel ball and the ore itself. Due to the continuous feeding of material, its pressure causes the material in the cylinder to move from the feeding end to the discharging end. The material reaching the finished particle size is discharged from the discharge end of the cylinder. When wet grinding, the material is carried out by the water flow; During dry grinding, the material is carried out by air flow. The straight cylinder energy-saving grid ball mill has a discharge grid at the discharge end, the mill relies on the grid plate to force the ore discharge, the pulp surface in the cylinder is low, reduce the ore grinding, and prevent the steel ball discharge. Under the same production conditions, the production capacity is higher than the overflow mill. Roller bearings are used at both ends of the cylinder instead of plain bearings, which saves energy significantly.

Raw Materials

MoleDive Wet energy saving lattice ball mill Guide

1. What are the application range of wet energy-saving lattice ball mill?

Ball mill is a kind of equipment widely used in mining, building materials, chemical industry, electric power and other industries, used for grinding various ores and non-metallic minerals. The specific scope of application is as follows:
1. Mine: The ball mill can be used to grind all kinds of metal ores, non-metallic minerals and black and non-ferrous metal mineral processing medium hardness materials, such as iron ore, copper ore, manganese ore, aluminum ore, lead zinc ore and so on.
2. Building materials: ball mill can be used to grind cement, limestone, gypsum, coal and other materials, widely used in cement factories, metallurgy, chemical, electric power and other departments.
3. Chemical industry: ball mill can be used to grind various chemical raw materials, such as caustic soda, iron oxide, zinc oxide, sodium chloride, etc., but also widely used in rubber, plastics and other industries.

2. The advantages and disadvantages of ball mill are?

The ball mill has the following advantages:
1. A wide range of processing materials: it can be used for grinding various minerals, non-metallic minerals and chemical raw materials.
2. High grinding efficiency: It can quickly grind materials and improve production efficiency.
3. Uniform grinding particle size: the material particles after grinding are evenly distributed.
Some disadvantages of the ball mill include:
1. High energy consumption: The ball mill needs to consume a lot of electricity during the grinding process.
2. There is a certain damage to the material: due to the changing movement of the grinding medium, the surface of the material is prone to small cracks and wear.
3. Not suitable for ultra-fine grinding: the grinding size of the ball mill has certain limitations, and the effect is poor for ultra-fine powder instruments.

3..Daily maintenance of ball mill

The ball mill is a kind of precision equipment that requires regular maintenance and maintenance to ensure the normal operation and service life of the equipment. Specific maintenance steps include:
1. Regularly check all parts of the equipment, including the motor, reducer, lubrication system, etc.
2. Regularly replace the worn parts in the equipment, such as steel balls, screens, etc.
3. Pay attention to the safe operation of the device and rectify possible faults in time.
In short, the ball mill is a kind of grinding equipment widely used in industrial production, with a wide range of application and high grinding efficiency, but there are also some shortcomings that need to be noted. According to the specific use environment and requirements, choosing the right ball mill equipment and maintenance mode will have a positive effect on industrial production.